315, Vishwa Deep Building, District Center, Janak Puri, New Delhi - 110 058, INDIA
Phone: +91 11 2553 3230    Fax: +91 11 2553 3230    Mobile: +91 9868 128 127
Email:    Website:

SXO-1503 117.9-137 MHz 3 dBd. (Omni)
5 dBd. (Offset) Gain

The SXO-1503 Aero/Aviation Band Antenna is manufactured using high-grade anodized aluminum. Powder coating of the complete antenna provides extra protection against corrosion in saline weather present in costal areas. By virtue of sealed active dipole and balun connections of SXO-1503, aero/aviation band antenna operates with constant VSWR and maintains itís top efficiency over itís maintenanceĖfree expected life of 10 years and more. Zero percent failure rate of SXO-1503 during itís life expectancy of longer than10 years.
It can be mounted on top of an antenna-tower for a Omni directional pattern or side mounted for an offset horizontal radiation pattern.

Design & Construction:
The SXO-1503 Aero/Aviation Band Antenna consists of two center fed folded dipoles stacked vertically. The antenna maintains constant gain and VSWR over its bandwidth of 20 MHz., making it highly suitable for single or multi-frequency systems. The center fed dipole ends and cable connections to the dipoles are sealed in epoxy at the end of the boom for protection against weather and imparting rigidity and strength to the dipole structure. Molded joints of phasing harness and N-Female antenna termination connector ensures complete waterproofing and many years of maintenance free operation.

Balun is sealed in side the horizontal boom of each dipole forming the input part of the center fed dipoles. A separate bulun for each dipole allows independent operation of each dipole free from any mutual interaction between the two dipoles.

Radiation Pattern:
When the two dipoles are arranged 180 degrees apart around the central mast, 3dBd. Omni directional radiation pattern results. Aligning the two dipoles collinearly a 5dBd. offset radiation pattern is obtained. The radiation pattern can be changed in the field by use of common hand tools.

Phasing Harness:
Specially designed center fed phasing harness ensures equal and in phase signal distribution to both dipoles. All power splitter joints are molded to avoid use of connectors/adapters for waterproofing and to minimize loss.

Stacking and Phasing:
Vertical stacking distance and phasing of dipoles is factory adjusted for top operation of the SXO-1503.

Test and Quality Control:
Each antenna is thoroughly tested at our test site to confirm to our published antenna specification before it is shipped. Test report showing VSWR v/s Frequency curve accompanies each antenna.

Frequency Range (MHz.)117.9-137
Gain (dBi.)3 dBd. (Omni)
5 dBd. (Offset)
Bandwidth (MHz.)Complete Span 20
Input Impedance (Ohms.)50
Radiation PatternOmni
Beamwidth 3db (Degrees)80 (Vertical)
VSWR< 1:1.5
RF Power Handling Capacity (Watts)500
Input TerminationN-Female
Lightning ProtectionDirect Ground
Mounting HWStainless Steel
Weight (Kgs)9
Wind Rating (KMPH)200
Overall Length (Meters)3.5
Shipping Length (Meters)1.8
Support Pipe O.D. (mm)50
Support Pipe MaterialAluminum
Maximum Mount Pipe Diameter
- mm (Inches)
Radiating Elements - MaterialAluminum

Please Note:   1. Specifications are subject to change without any notice.
2. Customized in-band and out of band versions are available on request.